Aputure LS 600d Pro II RGB LED Monolight (V-Mount), F10 Fresnel, Barndoors, Light Dome 150 Bundle

Aputure F10 Barndoors for LS 600d Fresnel Attachment

The 10-inch F10 Barndoors for the LS 600d Fresnel Attachment from Aputure offer a means to control the 15 to 45 degrees beam spread range of the Fresnel. Simply swing one or more leaves into the beam path to light areas you want and to keep light from areas you don't want illuminated. The 8-leaf design gives even greater control than 4-leaf versions and provides clean cuts of light.

Aputure F10 Fresnel

The Aputure F10 Fresnel is made for modular Bowens Mount fixtures. With its wide 250mm (9.84-inch) glass Fresnel, the F10 both immensely intensifies the output of a point-source LED, but also results in a quality of light lighting technicians will find similar to a Tungsten 5K or Studio 2K.

Intensely Bright

The F10 Fresnel functions at its best when paired with the Aputure LS 600d Pro, a 600W Daylight COB LED. Together, this combination eclipses Studio 2K Tungsten lights, and approaches the intensity of 5K Tungsten fixtures at flood. With a combined flood output of 11,440 lux and spot output of 29,300 lux at 3 meters, the 600d Pro and F10 Fresnel even compete on par with higher-powered HMIs.

Dual-Optic Design

The F10 Fresnel matches the unique design of the Fresnel 2X, utilizing a two-stage optical system to maximize light output. Utilizing a rear aspherical focusing element, the F10 Fresnel optimizes the output of an LS 600d Pro to fill the front Fresnel Element, resulting in up to 340% additional output in Flood mode.

Ergonomic Focusing

To ergonomically and precisely adjust its variable 15-45-degree beam angle, the F10 Fresnel uses Aputure’s helicoid focus design introduced in the Fresnel 2X. This seamless design requires no extra knobs or handles. Simply twist the lens ring, and adjust the spot/flood controls.

Minimized Light Leaks

Building on our experience from the Fresnel 2X, the F10 Fresnel uses an offset ventilation design in its heat-resistant body that allows for airflow while minimizing light leaks.

Impeccable Build

Despite its impressive 250mm (9.84-inch) Fresnel diameter, the F10 Fresnel maintains a compact heat-resistant construction. The shell of the F10 can withstand the heat of the LS 600d Pro, and due to its collapsible, and aspherical focusing lens, it can stow away to a depth of 6.8 inches (172.5mm).

Drop-In Accessory Slot

Another of many firsts, the F10 Fresnel is also the first Bowens Mount Fresnel to feature an industry-standard drop-in accessory slot. This heavy-duty accessory slot allows users to mount the F10 Barn Doors on the Fresnel for proper light shaping, and can even fit a 13-inch (330mm) scrim.

Durable Carrying Bag

Made to follow you onto any film set, the F10 Fresnel comes packed inside a heavy-duty carrying bag for easy travel.

Aputure Lantern 90

Building upon the same design as the classic Aputure Lantern, the Aputure Lantern 90 pairs the same quick-build system with an even larger surface area to provide an even softer volumetric lighting solution. At 90cm, the Lantern 90 has the same diameter as Aputure’s Light Dome II modifier, with an even more diffused surface area, allowing the Lantern to instantly light up large spaces.

Aputure Light Dome 150

The Light Dome 150 is a 150cm (59in) Bowens Mount QuickSetup Circular Softbox. Its substantial surface area makes it ideal for high-powered Bowens Mount LEDs, such as the Aputure LS 600d Pro or LS 600x Pro. Its 32-sided quick-setup build transforms a hard point-source light into a soft source with perfectly circular reflections in one minute. The Light Dome 150 also includes two diffusion strengths to allow users to fine-tune their intensity and light quality. 

Aputure Light Storm 600d LED Light (V-Mount)

The Aputure Light Storm 600d LED Light is ideal for any challenging lighting circumstance you may encounter as a cinematographer or photographer may. With its padded rolling case, the LS 600d is ready for any situation.

Raising the Bar

The LS 600d uses the same light source as its professional predecessor, and its 600W COB LED makes it one of the brightest point source LEDs on the market. With the hyper-reflector, it can produce up to 8,500+ lux at 3 meters, or up to 29,300+ lux at 3 meters with the F10 Fresnel.

Versatile Bowens Mount

The LS 600d, as a member of the Light Storm family, features an inbuilt Bowens Mount for quick attachment of accessories and modifiers, such as the F10 Fresnel for intense brightness and the Light Dome 150 for outstanding softness.

Slim Control Box

The control box on the LS 600d is substantially lighter than the controller on the LS 600d Pro. The LS 600d control box weighs 3.24kg (7.14 lb), which is nearly half the weight of the 5.8kg (12.79 lb) control box found on the LS 600d Pro. The LS 600d controller retains several of the LS 600d Pro's control methods and functionalities, such as 2.4G Remote Compatibility, DMX512 In and Out, and Sidus Link, while losing approximately half of its weight.

Sidus Link App

The LS 600d is an excellent tool for photographers and video artists that need quick access to high-quality output. Using Sidus Link and DMX512 control to connect the LS 600d into onset processes enables producers a strong fixture that smoothly fits into their existing ecosystems with smooth dimming control, no color shift, and no need for scrims to reduce output.

Curved Yoke

The lamp head of the LS 600d keeps the curved yoke of its older sibling since it employs the same structure as the LS 600d Pro lamp head. When used with bigger light modifiers like the F10 Fresnel, Light Dome 150, or Light OctaDome 120, the LS 600d benefits from a curved yoke that is missing on comparable light fixtures.

From 0 to 100% Dimming

The LS 600d, like the LS 300d II and 300x, can dim as low as 0% in 1% increments, giving filmmakers and photographers far more control than typical fixtures and strobes.

Aputure Light OctaDome 120 Octagonal Softbox (Bowens Mount)

The Light OctaDome 120 is a 120cm (47.2in) Bowens Mount Octagonal Softbox. This 8-sided softbox transforms any point source Bowens Mount light fixture into an ultra-soft area light, blanketing your set in diffused light. Its large 120cm diameter also pairs perfectly with high-output fixtures to create the ultimate soft source, such as the Aputure LS 1200d Pro, 600d Pro, or 600x Pro.

Exceptional Design

The Light OctaDome 120 includes two diffusion strengths (1.5 and 2.5 stops) and an inner baffle to allow users to fine-tune their intensity and light quality. Its 8-sided structure also makes it the perfect softbox for on-the-go shooting, combining its flat-pack ability, lightweight construction at only 1.7kg (3.75lbs), and the ideal balance between a square frame or a fully circular softbox.

Ideal for Cinematographers and Photographers

The Light OctaDome 120 is ideal for cinematographers and photographers who need a compact and portable alternative to a 4x4 diffusion frame. Its 8-sided frame is a familiar friend of any cinematographer or photographer.

For any shooter that is always on the go, the Light OctaDome 120 also packs flat like the Aputure Light Dome SE or LightBox 60x90, making it an easy and portable travel companion. And particularly for those on-location shoots that need a faster setup, the Light OctaDome 120 only has 8-sides, meaning you can set up in half the time of a Light Dome SE.

Convenient Size

If space is a problem, it spans a 120cm (47.2in) width, making it larger than the Light Dome SE, for the perfect amount of softness, but smaller than a Light Dome 150, so it can fit in tighter spaces. 

Aputure LS1200d Series Pro Three Bowens Mount Hyper Reflectors Kit with Varying Beam Angles

The Aputure LS 1200d Pro Reflector Kit is designed to optimize the output of the Light Storm 1200d Pro, the brightest light in the Aputure and Light Storm lineup. To adapt the output and beam angle of the LS 1200d Pro to your shooting scenario, the LS 1200d Pro Reflector Kit includes three Bowens Mount Hyper Reflectors with varying beam angles, Narrow, Medium, and Wide.
Function
With its Narrow Hyper Reflector, the LS 1200d Pro can achieve an output of 83,100 lux at a distance of 3 meter, and an output of 22,400 lux with the Medium Hyper Reflector at the same distance.

Aputure Light Dome Mini III (22.8") Compact Circular Softbox

The Light Dome Mini III is Aputure’s compact circular softbox solution for Bowens Mount lights with a brand new quick-folding, flat-pack design. Add a touch of softness and save valuable time on set with the ideal 2 foot (60cm) beauty-dish style small softbox for your lighting kit.

Start shooting sooner with the all-new quick-folding design

Building the Light Dome Mini III is now faster than ever, saving valuable time on set. Being among the fastest circular softboxes to set up and break down on the market, the Light Dome Mini III can snap into its full compact circular shape in seconds so you can start shooting sooner.

More room for lights with its flat-pack design

Unlike traditional quick softboxes, the Light Dome Mini III’s quick-setup speed ring folds into a slim, flat profile. Its flat-pack design requires less setup time and frees up more space for other filmmaking tools, making it more portable and travel-ready.

Simplify your toolkit with one softbox for all your Bowens lights

Like other Aputure softboxes, the Light Dome Mini III features the universal Bowens Mount and is the perfect pairing for point-source fixtures up to 600W of output, ranging from the Aputure Light Storm series to the amaran Bowens Mount lights. This versatile softbox reduces the size of your toolkit, allowing professionals to work smarter, not harder.

Take soft lighting anywhere with our compact footprint

The Light Dome Mini III provides the quick-setup and slim profile benefits of the Light Dome III in a smaller build. With the Mini III, you’ll have everything you need for small-footprint lighting, including the folding speed ring, diffusion cloth, a gold / silver reflector, and a 40º fabric light control grid, the Light Dome Mini III is the ideal modifier for finetuning the perfect lighting.

Aputure Lantern Softbox

With our recent release of the Fresnel 2X and Spotlight for intensifying and shaping hard light, we decided it was time to introduce an easier way to shape your soft light too.

Quick Solution

This spherical softbox can pop open and be ready to use in mere seconds. With the Lantern you can produce soft, even light wherever your shoots may take you.

Even, Omnidirectional Light

By utilizing a 26-inch spherical design, the Lantern spreads the light from your LED or Studio Strobe in all directions with a 270-degree beam angle.

Art of Control

The Aputure Lantern is one of the only spherical softboxes on the market with a 4-section fully adjustable light control skirt. By using a hook-and-loop design, the removable skirts can attach in any position, to quickly and precisely control your soft light.

Ready For Run and Gun

With its tension-based quick release frame, the Lantern can be set up or broken down in just a few seconds, allowing you to set up fewer lights, faster.

Any Bowens Light

With the ability to fit onto any Bowens mount Studio Strobe or LED fixtures, such as our 120d or 300d series lights, the Lantern is the perfect photo or video accessory for casting soft light over a wide area, while still maintaining control.