DJI RS 3 Pro Gimbal Stabilizer Combo

The DJI RS 3 Pro Gimbal Stabilizer Combo is an advanced, comprehensive camera expansion platform that empowers videographers and delivers coordinated shooting solutions for professional crews, building on the impressive features of the Ronin series. Nothing is out of reach with the DJI RS 3 Pro. It features a Ronin Image Transmitter, Focus Motor (2022), Lower Quick Release Plate, and various accessories in addition to the original.

Manage Large Payloads

The RS 3 Pro features enlarged carbon fiber axis arms that provide professional cameras extra balancing room, making it ideal for cameras like the Sony FX6 or Canon C70 with 24-70mm F2.8 lenses. The new Extended Lower Quick-Release Plate provides more sturdy camera mounting and makes it easy to add lens support for more secure configurations. A fine-tuning slider for the tilt axis has been added to make the balancing process easier by allowing the camera to be moved forward or backward more precisely, down to the millimeter. The RS 3 Pro can be balanced with reduced friction and resistance, even when attaching heavier cameras, thanks to Teflon-coated components.

Automated Axis Locks

RS 3 Pro helps you to get up and running quickly so you don't miss a shot. Simply hold down the power button and the three axes will instantly release and extend, allowing you to begin shooting in seconds. The axes automatically lock and enter sleep mode when the power button is pressed once, allowing the organization to operate more effectively. It will fold and lock automatically if you press and hold the power button.

Payloads with a Large Capacity

The RS 3 Pro's optimized structural design keeps its weight at 1.5 kg/3.3 lb (including gimbal, battery grip, and dual-layered quick-release plates), while its load capacity is a sturdy 4.5 kg/10 lb, providing powerful support in a lightweight body.

Shutter Control Through Wi-Fi

The RS 3 Pro is equipped with Dual-Mode Bluetooth technology, allowing for efficient and dependable wireless shutter control. By pushing the record button on the stabilizer after the initial Bluetooth connectivity, you can control video and photo shooting. A previously attached camera will reconnect immediately, saving you time with each subsequent use.

Mode Switching in a Flash

You may switch between Pan follow, Pan and Tilt follow, and FPV modes by sliding the new Gimbal Mode Switch. The FPV mode selection may also be changed to 3D Roll 360, Portrait, or Custom, allowing you to fine-tune your setup and get flying quickly.

It is Better to be Bigger

A huge, built-in 1.8-inch OLED full-color touchscreen expands the screen size by 28% over the RS 2, making it much easier to adjust parameters, check shooting status, and frame your tracked subjects. Every option is more intuitive and precise thanks to the revised user interface. The OLED screen is also brighter than the LCD screen on the RS 2, allowing for improved outdoor viewing while using less power.

Premium Carbon Fiber Construction

The RS 3 Pro arms, like the Ronin 2, are made from laminated sheets of uncut carbon fiber. This makes it stiffer and lighter than the jointed carbon fiber material used on the RS 2, allowing it to deal with even more demanding shooting circumstances.

Next Step in the RS Stabilization Process

The RS 3 Pro provides significantly improved stability in any condition thanks to the third generation of RS stabilization algorithms. According to laboratory testing, the RS 3 Pro has a 20% boost in stability over the RS 2, making it easier to manage low-angle shots, running scenarios, and moving between high and low positions.

Get SuperSmooth Outcomes

When SuperSmooth mode is selected, the RS 3 Pro increases motor torque to further improve stabilization, resulting in a steady film even in fast-moving situations or when utilizing lenses with a focal length compared to 100mm.

Assist with LiDAR

The RS 3 Pro uses Ronin 4D's LiDAR focusing technology to make focusing easier. Within a 14-meter range, the new LiDAR Range Finder (RS) can project 43,200 ranging points. It also has a built-in camera with a 30 mm equivalent focal length and a broad FOV of 70-degree, which can handle most focusing situations.

All-New Focus Motor

The next-generation DJI RS Focus Motor (2022) has a three-fold increase in torque (up to 1 Nm) and a 50% reduction in audible noise. This allows for a more fluid concentrating experience while also reducing the impact on audio recording. It also has a quick-release structure that allows it to be erected quickly and effortlessly without the use of any tools.

Enables Cinematic Autofocus

Cinematic autofocus on manual lenses is also achievable thanks to the combination of the LiDAR Range Finder and the new Focus Motor. Once you've pressed the M button on the gimbal, you may easily switch between manual and autofocus to match your demands in both modes.

ActiveTrack Pro

On the Ronin series, ActiveTrack Pro tracking has never been more accurate or responsive. Without the Ronin Image Transmitter, the next-generation ActiveTrack Pro can read images directly from the camera built into the LiDAR Range Finder (previously known as the Ronin RavenEye Image Transmitter). The LiDAR Range Finder also has a self-developed microprocessor, similar to the one used by Ronin 4D, that increases ActiveTrack Pro's computing capability by more than 60 times when compared to ActiveTrack 3.0 on the Ronin Image Transmitter.

Wireless Transmission Over Long Distances

The O3 Pro Video Transmission offers a 6km/20,000 feet video and audio transmission range with ultra-low latency, as well as automated frequency hopping between the 2.4 GHz, 5.8 GHz, and DFS bands, giving crews a remarkably reliable and interference-free remote monitoring experience.