Westcott FJ80 II S Touchscreen 80Ws Speedlight with Sony Camera Mount with ProGrip 2 Handheld Mount

Westcott FJ80 II S Touchscreen 80Ws Speedlight with Sony Camera Mount

The Westcott FJ80 II S Touchscreen 80Ws Speedlight with Sony Camera Mount features an inbuilt radio transmitter. It has never been simpler to navigate a Speedlight menu system thanks to the 2.8-inch LCD color touchscreen. Bid adieu to buttons and clumsy menus. You may use the FJ80 II on-camera as a flash and transmitter thanks to its built-in 2.4 GHz transceiver. It has a custom Sony hot shoe mount that works with the majority of Sony cameras. Directly operate off-camera FJ80 speed lights, FJ-XR receivers, and FJ400 and FJ200 strobes from the hot shoe. Off-camera installed the FJ80 functions as a client Speedlight. Utilize an FJ80, FJ-X2m, or FJ-X3 Wireless Trigger that is attached to the camera to trigger.

Optimal Picture Clarity

In flash increments of either 0.1 or 1.0 stops, the FJ80 Speedlight flash offers the most precise color temperature stability at 5500K (200K) over its entire 9-stop output range. This calls for photos that are color-consistent throughout the entire shoot and have color temperatures that are the same over the full FJ Flash Series. In areas with strong interference, such as parties and weddings, the FJ80 II enables improved wireless connection. Control from up to 328 feet up to 16 groups on 31 different channels (100m). Whole numbers or fractions can be used to indicate the energy range.

Easy-to-Use Design

The FJ80 provides Front and Rear Curtain Sync, High-Speed Sync (HSS) up to 1/8000s, Manual and TTL Flash Modes, and a simple full-color LCD touchscreen display. You can manage up to 16 groups using 31 different channels. Utilize group and channel assignment, group exposure compensation, and automatic memory recall. Up to 20 frames per second of continuous capture, TTL to Manual Equivalent, modeling lamp settings, and more. Utilize the onboard USB-C data connector to download and update the most recent firmware to keep your FJ80 II current.

500+ Full-Power Flashes Per Charge

The FJ80 II has a quick recycle period of 0.05 to 1.5 seconds and can produce 500+ full-power flashes per charge. A full recharge of its removable 11.1V 1600mAh lithium polymer battery takes two hours. Faster shooting and safe operation during prolonged use are made possible by self-monitoring heat protection. Its LED modeling lamp uses less energy and offers independent output control and auto-adjust.

Mount, Tilt, and Rotate for Total Versatility

The pivot ranges of this portable flash head are 360 degrees horizontally and 90 degrees vertically. The FJ80 can be mounted off-camera using either its built-in 1/4 inch-20 female thread or the cold shoe. To make it stand alone, use the provided shoe stand. The shoe stand has a 1/4 inch-20 female thread that allows it to be mounted to the majority of light stands without the need for extra hardware.

Westcott ProGrip 2 Handheld Off-Camera Flash Mount

Enhanced Handheld Off-Camera Flash Mount for Portable Lighting Freedom

Say goodbye to the limitations of light stands and embrace the freedom to capture stunning images wherever your creativity takes you. Designed with comfort and convenience in mind, the ProGrip 2 provides unparalleled mobility and adaptability for your photography needs, whether you're shooting on-location portraits, weddings, or capturing beautiful beach sessions.

Compatible with Speedlights and Portable Flashes

Compatible with the Westcott FJ80 speedlights, FJ200 strobe, and a wide range of third-party lights, the ProGrip 2 is a valuable addition to your lighting arsenal. Easily attach your light using the universal cold shoe or adjustable 1/4"-20 male thread, allowing for both vertical and horizontal mounting to achieve your desired lighting angle and spread.

Effortless Attachment of Umbrella-Based Modifiers

Whether you prefer using a bounce or shoot-through light modifier, this versatile off-camera flash mount adapts to your creative preferences. The ProGrip 2 is equipped with a 9mm umbrella mount and tension knob to accommodate both collapsible and standard umbrellas.

Comfortable Speedlight Grip for a Secure Hold

With its non-slip rubber grip pad, the ProGrip 2 offers exceptional traction, ensuring a secure hold. Its robust design supports up to 6 lb. (2.7 kg) of weight, providing stability when attaching a wide range of off-camera flashes and compact light modifiers, such as Rapid Box Switch softboxes, barndoors, gels, or reflectors.

Durable Construction and Convenience

The ProGrip 2 is a well-crafted tool that prioritizes durability and versatility. Its reinforced nylon construction ensures long-lasting use while maintaining its structural integrity. The device comes equipped with a non-slip rubber pad and a removable FJ200 insert, making it suitable for secure horizontal mounting of your light for fast-paced on-location shoots.

Enhance Your On-Location Shoots with Freedom and Versatility

Whether you're capturing timeless senior portraits, memorable wedding receptions, or breathtaking beach portraits, the ProGrip 2 is your ideal companion. Say goodbye to the limitations of traditional light stands and unlock a new level of freedom and versatility in your photography.