Westcott FJ80 II S Touchscreen 80Ws Speedlight with Sony Camera Mount

The Westcott FJ80 II S Touchscreen 80Ws Speedlight with Sony Camera Mount features an inbuilt radio transmitter. It has never been simpler to navigate a Speedlight menu system thanks to the 2.8-inch LCD color touchscreen. Bid adieu to buttons and clumsy menus. You may use the FJ80 II on-camera as a flash and transmitter thanks to its built-in 2.4 GHz transceiver. It has a custom Sony hot shoe mount that works with the majority of Sony cameras. Directly operate off-camera FJ80 speed lights, FJ-XR receivers, and FJ400 and FJ200 strobes from the hot shoe. Off-camera installed the FJ80 functions as a client Speedlight. Utilize an FJ80, FJ-X2m, or FJ-X3 Wireless Trigger that is attached to the camera to trigger.

Optimal Picture Clarity

In flash increments of either 0.1 or 1.0 stops, the FJ80 Speedlight flash offers the most precise color temperature stability at 5500K (200K) over its entire 9-stop output range. This calls for photos that are color-consistent throughout the entire shoot and have color temperatures that are the same over the full FJ Flash Series. In areas with strong interference, such as parties and weddings, the FJ80 II enables improved wireless connection. Control from up to 328 feet up to 16 groups on 31 different channels (100m). Whole numbers or fractions can be used to indicate the energy range.

Easy-to-Use Design

The FJ80 provides Front and Rear Curtain Sync, High-Speed Sync (HSS) up to 1/8000s, Manual and TTL Flash Modes, and a simple full-color LCD touchscreen display. You can manage up to 16 groups using 31 different channels. Utilize group and channel assignment, group exposure compensation, and automatic memory recall. Up to 20 frames per second of continuous capture, TTL to Manual Equivalent, modeling lamp settings, and more. Utilize the onboard USB-C data connector to download and update the most recent firmware to keep your FJ80 II current.

500+ Full-Power Flashes Per Charge

The FJ80 II has a quick recycle period of 0.05 to 1.5 seconds and can produce 500+ full-power flashes per charge. A full recharge of its removable 11.1V 1600mAh lithium polymer battery takes two hours. Faster shooting and safe operation during prolonged use are made possible by self-monitoring heat protection. Its LED modeling lamp uses less energy and offers independent output control and auto-adjust.

Mount, Tilt, and Rotate for Total Versatility

The pivot ranges of this portable flash head are 360 degrees horizontally and 90 degrees vertically. The FJ80 can be mounted off-camera using either its built-in 1/4 inch-20 female thread or the cold shoe. To make it stand alone, use the provided shoe stand. The shoe stand has a 1/4 inch-20 female thread that allows it to be mounted to the majority of light stands without the need for extra hardware.