ADE is releasing several Pro Series red dots. This 2023 Pro Series for ADE Advanced Optics RD3-021 (2022 to present). NUWA green dot is called NUWA PRO (RD3-021PRO). This ADE Advanced Optics NUWA Pro is designed to fit any pistol, mounting plate, slide, or optic cut with RMS and RMSC screw pattern and footprint.

Feature Packed

The NUWA Pro has a fixed 66 MOA circle with 3 MOA dots which cannot switch between. It is one of the lightest weight and smallest RMS footprint green dots with full metal construction, top battery loading, and motion-activated function. With Motion Activated System, while the NUWA Pro is turned on, the green reticle illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on the illumination at the previous brightness setting. Operates with a single CR1632 battery. 6 daylight brightness settings and 1 NV setting. The Night Vision Dot is not visible to the human eye, it can only be seen through a Night Vision eyepiece or goggles. Battery life up to 10000 hours. ADE NUWA Pro created an iron sight curve at the end of the body and also added two white dots on the curve. For the rear part of the red dot to become a backup iron sight. With the ultra-short design, the red dot provides a distance or gap on some full-size optics-ready pistols, to give enough distance to be a Co-Witness backup sight, in addition to the LED dot and pistol-equipped iron sight. 

Added Functionality

For non-optics-ready pistols that need to use an optic plate or adapter to replace the pistol manufacturer-equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for co-witness. Comes with an adjustment tool, user manual, lens cloth, red dot cover, CR1632 battery, and screws. Parallax-free and provides unlimited eye relief. Made of aircraft aluminum in an anodized black finish with multi-coated lens.

Compatibility

Comes with 3 pairs of screws for Sig P365XL/X, Springfield hellcat OSP, and Canik TP9 Elite SC only. The provided screws might not work with every compatible pistol listed. ADE makes the red dot accept the industrial standard footprint. The pistol manufacturer makes the optic cut and slide for the same footprint, but they have their own opinions to decide which type screws the screw holes take. ADE does not know the screw spec every pistol manufacturer used for their screw hole. Please ask the pistol manufacturer what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. ADE RD3-018 Spike, RD3-021 NUWA , and RD3-030 Apollo fit optic cut and optic plate that is compatible with shield RMS, RMSC, Deltapoint pro footprint